Our knowledge base
all questions answered
Introduce normal Feed Equipment Knowleagde, such as standard, maintenance the machine, main technical data, solutions, etc.
Two-phase electricity refers to 220-volt single-phase electricity. It also refers to the rated voltage of electrical appliances of 380 volts.
The double-rotor pulverizer is characterized in that the external force applied to the solid during the pulverization process is pulverized, sheared, impacted, and ground.
Auxiliary suction system for feed pellet plant is necessary, extrend the service life of machinery, and protect the environment
We pay attention to adjusting the feed crushing mechanical hammer and sieve plate during the operation of the feed crushing process, and these fittings must be in the best position during operation.
The phenomenon of vertical feed pulverizing and stirring unit not sucking or unloading is inevitable in the course of use. List the method of solving these phenomena
General parts for feed pulverizing mixing unit and dry powder mixing unit
The electronic batching scale is mainly composed of a scale bucket, a force transmission connector, a weight display instrument and an electronic circuit (including a power source, an amplifier, an analog-to-digital conversion, an adjustment component, a
The shells of feed hammer mill are bolted together, welded by steel plates and angle steel, and divided into a casing, a lower casing and a half shell.
The feed mill affects its own crushing yield:1. Influence of sieve plate vibrationWhen the feed pulverizer pulverizes the material, the pulverization chamber will automatically form a
Multifunctional feed mill is mainly used to crush rice, corn, soybean, soybean meal, wheat, etc. It can also crush hard materials such as peanut meal, corn stover, cotton rod, weed, branches, etc.
Feed mill hammer selection:Hammer is the most important part of the feed mill, and it is also the most wearable part. The crushing effect of a crusher depends largely on the quality and type
The structure of the feed mill consists of three parts: the feeding mechanism, the crushing chamber (rotor, hammer, sieve, tooth plate) and the discharge part (fan, collecting cylinder, dust collecting bag).
The counter-flow cooler is an essential cooling device for the production of feed pellets, which prevents deformation and breakage of the finished pellet feed, and prevents the pellets from being bonded and mildewed during storage.
Vertical feed mixer 1000 kg/500 kg normally adopts three-phase and self-priming equipment for crushing feed raw materials, such as corn, wheat, bean, etc.
Chicken feed grinder machine for making corn flour,chicken feed mill and poultry feed mixing unit can smash various feeds