Feed Equipment Knowleagde

The structure of the feed mill consists of three parts: the feeding mechanism, the crushing chamber (rotor, hammer, sieve, tooth plate) and the discharge part (fan, collecting cylinder, dust collecting bag). When working, the feed is fed. The mechanism enters the crushing chamber and flies toward the tooth plate under the impact of the high-speed rotating hammer. After the collision with the tooth plate, it is hit again by the hammer. At the same time, the feed is strongly rubbed between the sieve surface and the hammer. Under the repeated impact collision and friction, the feed is gradually pulverized, and the pulverizer without the fan causes the pulverized material to be discharged through the sieve hole by the air flow in the pulverization chamber. After the pulverizer with a fan extracts the pulverized material from the sieve hole, it is necessary to separate the air in the mixed gas stream from the pulverization by a powder collecting device (such as a collecting cylinder, a dust collecting bag, etc.).

The crushing machinery used in the feed processing plant is largely restricted by the crushed materials. The ultimate goal of the crushing is to make the fineness of the raw materials meet the requirements of granulation. The corn cobs and sweet potatoes commonly used in farms can be used to make feed. The most important value of plant feed is the rich vitamins and large amounts of cellulose.

Cellulose is not easy to digest, and the nutritional value is not great, but cellulose can stimulate the intestinal wall in the body, help the bowel movements to easily defecate, avoid animal diarrhea or constipation, such as bean cake, peanut cake, wheat bran, rice bran and so on. The feed processed by the feed machinery pulverizer can provide more nutritious nutrition for the animals, and the taste will be greatly improved.