Livestock Feed Machine Knowleagde

Small household sheep feed pellet machine is a kind of swinging action with a rotating drum, and it can grind wet powder raw materials into granules through a stainless steel sieve.

1. The scope of application of the swing pellet machine/swing pellet machine
1. It is widely used to smash into pieces and become ready-made particles.
2. In the aspect of chemicals, the powder used as a wettable powder is ground into granules. After drying, it is used to compress tablets. It can also be crushed during storage and agglomerated into agglomerates or agglomerated in the process of chemical processing. In industry, it is used to process candy and sugar mixture and malt milk and other products. In other industries, such as ceramics, plastics and other mixtures become shaped particles.
3. This small pellet machine is not suitable for semi-solid, fluid, slurry or abrasive applications.

Second, the basic characteristics of the swing pellet machine/swing pellet machine
1. The small pellet machine is strong, easy to operate, stable in operation, and has a large-volume bucket. The rotating drum is made of stainless steel to ensure the quality of the processed material is clean and does not cause discoloration.
2. The mesh size of the mesh sieve should be prepared by the user according to the particle size requirements. Its device is clamped by two steel pipes, which is easy to assemble and disassemble. It is tightly supported by a fine tooth wheel and can be adjusted appropriately.
3. Description of the structure of the swing pellet machine/swing pellet machine
1. Main body: The machine body is an independent rectangular cylinder. The upper part is equipped with a closed bearing seat and is connected to the powder hopper. The powder hopper extends out of the machine body. The bottom is equipped with a rectangular chassis. The floor is wide and flat, so the lower part must be installed. Can be placed indoors arbitrarily.
2. Pellet manufacturing device: the rotating drum is placed horizontally under the powder hopper. There are bearing supports at the front and back. It is driven by the rack to make reverse rotation. The front bearing cover on the end face is movable. When assembling and disassembling, only need to rotate The next wing nut, the bearing cover and the rotating drum can be drawn out. The two ends of the placed drum are made with convex square rings, which are embedded in the bearing chamber, so that the oil will not penetrate into the powder and will not be blocked by adhesion.
3. Reduction gearbox: worm gear transmission, 1:12 speed ratio, oil can be stored in the box to ensure good gear lubrication and no noise, there is a sight glass on the box to observe, observe the operation and oil storage, the outer end of the worm gear, Equipped with an eccentric shaft to drive the rack to reciprocate.
4. Screen clamp pipe: The device is installed on both sides of the rotating drum, made of steel pipe, with a long groove in the middle, and the two ends of the screen are embedded in the groove, and the flower-shaped hand wheel is turned to wrap the screen on the outer circle of the rotating drum. The handwheel is supported by gears, and the tightness can be adjusted.
5. Motor frame: one bolt is fastened to the screw, and the motor is installed on the iron plate. When the screw bolt is turned, the motor moves up and down to adjust the belt.

Start the rocking granulator, pour the mixture into the hopper, and form particles through the stainless steel screen by the swinging action of the rotating drum, and fall into the container, such as crushed pieces, should be added gradually, not to be topped up, so as not to be overwhelmed. Large, and make the screen vulnerable.

Note: If the powder is stagnant in the powder hopper, do not shovel with your hands to avoid injury to your hands. Use bamboo shovel or stop working.

Speed ​​selection: Due to the different nature of the raw materials used, the speed is selected. Generally, the choice can be made according to the viscosity and dryness of the material. Dry products are faster, wet products should be slow, but the scope cannot be uniformly specified and should be determined by the user according to the actual operating conditions.

Machine parts lubrication of swing pellet machine/swing pellet machine
1. The box part of this small pellet machine is equipped with an oil meter. You should refuel it all at once before starting up. It can be added in the middle according to the temperature rise and operating conditions of each bearing.
2. The worm gear box must store oil for a long time. The oil level of the worm gear is such that all the worm gear invades the oil. If it is used frequently, the oil must be replaced every three months. There is an oil plug at the bottom, which can be used to drain the oil.
3. When refueling the small pellet machine, don't let the oil spill out of the cup, let alone flow around the machine and on the ground. Because oil easily pollutes materials and affects product quality.

Swing pellet machine/swing pellet machine maintenance instructions
1. Check the parts regularly, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other movable parts are flexible and worn. If any defects are found, they should be repaired in time and should not be used reluctantly.
2. The small pellet machine should be used in a dry and clean room, and should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
3. After the small pellet machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then install it, ready for the next use.
4. When the roller moves back and forth during work, please adjust the M10 screw on the front bearing to the proper position. If the gear shaft moves, please adjust the M10 screw on the back of the bearing frame to the proper position, adjust the gap so that the bearing does not make a noise, turn the pulley by hand, and the tightness is appropriate. Too tight or too loose can cause damage to the machine. .
5. If the small particle machine is stopped for a long time, the whole body of the machine must be wiped and cleaned, and the smooth surface of the machine parts shall be coated with anti-rust oil and covered with a cloth canopy.

Swing pellet machine / swing pellet machine installation instructions
1. This small pellet machine is packaged as a whole. After unpacking, move it to a proper place of use and use it after leveling.
2. Electrical wiring device: Pay attention to the direction of rotation and do not reverse it, because one end of the worm has a flat ball bearing, and the direction of the force must be on the bearing, otherwise it will cause damage to the other end of the worm and heat, which will affect the service life of the machine.