Livestock Feed Machine Knowleagde

Feed hammer mill, utilized for crushing the raw materials into feed powder.Feed mixer also known as the feed mixing machine, adequately mixes the crushed materials to enhance the uniformity of the constituents.Additionally known as feed pellet mill is the key piece of equipment in this production process. Our salesman will offer you the best recommendation based on your capacity requirements.Feed pellet packaging and weighing machine for weighing the pellets and packing them uniformly.Other machinery required might be such as a pellet cooler, pellet crumbler, grease adding machine.

Cattle Feed Manufacturing Process

Step 01: Raw Materials Reception and Cleaning Process
The first stage is to receive and clean the raw materials such as grains, beans, forage or fishmeal used to make pelleted feed.

Step 02: Feed Crushing Process
These materials are then fed into the hammer mill where it is ground into a size suitable for the production of feed pellets.

Step 03: Feed Mixing Process
The pulverized materials passes through a feed mixer, where different ingredients are added to the feed materials to ensure that the finished pellets contain all the nutrients needed.

Step 04: Feed Pelleting Process
The granulation stage is the most important stage in the feed production, because the feed powder is converted into pellets of the desired size and shape. Compared with the flat die pellet machine, the ring die feed pellet machine has a large production capacity.

Step 05: Feed Pellets Cooling Process
The feed pellets are produced at a temperature of 88 degrees Celsius and a humidity of 17-18%. For cooling, drying and storage, the humidity should be reduced to 10-12%. Therefore, the feed pellets are passed through a pellet cooler where they are cooled to near room temperature and dried to reduce moisture levels.

Step 06: Feed Crumbling Process
Sometimes animal feed will be crumbled after granulation. The crumbling, for example, is accomplished by pulverizing the pellets between the two rollers. The distance between the two rolls will make it possible to achieve the desired degree of crumbling.

Step 07: Feed Pellets Packaging
After the animal feed pellets are produced, the pellets are placed in a bag using a semi-automatic packaging machine, stored or transported to the end customer. A computer-controlled machine measures the amount of feed per bag and then pneumatically discharges it into a bag for packaging. The bag with the small ball will be transported to the machine by the conveyor belt and will automatically sew the top of the bag so that the bag can be transported.