Farming Knowleagde

Straw feed pellet machine advantage
1. Straw feed pellet machine makes stalk biomass straw pellets as a new type fuel to replace coal for various purposes such as cooking, heating and power generation. Biomass pellet fuel has less environmental pollution than mineral fuel, and it is easy to obtain, cheap, and resource-rich. As long as there are green plants growing year after year, this resource will never be exhausted.
2. The straw granules produced by the straw feed pellet machine overcome the weakness of the straw itself, such as light weight, large volume, and easy to use wind and snow, and meet the requirements of commercialization. Moreover, the straw feed pellet machine produces forage grass and feedable crop straw into forage grass pellets, and the forage grass is matured and has good palatability, long-term preservation and no deterioration, and is convenient for storage, so that the resources of the forage production area have a wider market, Protecting grasslands and developing captive animal husbandry play an important role.

The precautions for the straw feed pellet machine:
1.Check the power supply. This is not only to protect the straw feed pellet machine, but also to protect people's safety. If there is a problem with the power supply, it is very likely to burn the main body and adapter of the straw feed pellet machine.
2. During working of machine, Do not shake the machine. Because the machine is in the uniform screening of the running net clamp tube, if the drying net will shake after shaking, the product that passes through the straw feed pellet machine will be very unqualified, and the straw feed pellet machine will be installed with a anti-sloshing when it leaves the factory. The device can protect the products that are produced to meet the standards.
3. Protect the host based on the product. When using granules to process ingredients, the size of the drying net is different, but the load of the main machine is different, so it is necessary to maintain the main machine for a certain period of time. This is also the reason why the main unit can be used for a longer period of time.
4. We must pay attention to the operation according to different mixtures, the speed must be stable, but also according to different materials. If the material is very dry, we can adjust the speed a bit faster. If the material is very wet, then the speed will be slowed down, so that it will not cause mechanical death symptoms, but it still needs to be selected at the time of operation.