Cases

Buy the fish feed production line, How to maintenance feed pellet plant to extended service life. List the six tips to help the user and farmer or feed pellet industry.

Normally used the engine oil and grease to maintenance the machine, such as the feed mixer, crusher and feed extruder etc. For the part of general refueling and cast bearing, add it once every 1-3 months for all reducers, and add it once every 3-6 months for bearings.

Self-priming grain crusher:The crushing part needs to add engine oil once time every one month pls,add full
The single-shaft horizontal feed mixer: Adding gear oil is mainly determined according to the frequency of use. You can check the remaining oil amount and the condition of the oil at the transparent plastic interface (oil gauge) on the side to assist in judging whether it needs to be refueled.
Extruder machine: The fish feed extruder machine this place add grease; This place add engine oil pls,add full,every two months add once

Oil-spraying machine: Add grease every half of year
Add gear oil,add once every three months
All bearing parts are greased,change once every half of year