Fish Feed Machine Knowleagde

The feed mill machine is a common equipment for feed processing, in which the conveyor belt is most prone to failure, and the cause of the failure is mostly caused by improper operation of the feed mill.

Failure reason of belt of feed mill machine
1. The amount of feeding of the machine is too much, resulting in the remaining material smashing and remaining, and the residual material accumulated in the machine causes the material and the belt to move relative to each other and wear the conveying belt;
2. The material crushed by the user entrains too many bark with bark. These bark with bark, the feeding roller can not be reasonably tightened and sent to the specified cutting position, causing the tree raft and the belt to move relative to each other and damage. Belt. In addition, the foundation of the driving roller of the conveying assembly is a flat ground, and the belt is torn if too much piled up.

The solution to these faults:
1. The feed amount of the feed mill is operated according to the specified load, and it cannot be blindly greedy;
2. If the material with bark is smashed, it is recommended to feed the feed from the root or remove the bark and then smash it;
3. If the bottom of the driving roller is flat and solid, the grounding hole should be opened according to the installation diagram of the water droplet king feed mill to prevent material accumulation.