Livestock Feed Machine Knowleagde

ZCSP300D 600kg/h-800kg/h Mobile feed pellet production line includes crushing section, material mixing, storage and conveying section, pelletizing section, sieveing & pellet conveying section and other aluxiliary equipments.

ⅠCrushing section
Hammer Mill
It's with 15 hammer blades, by changing the different position of the blades, it's suitable for crushing woody or biomass or forage material with size less than 20 mm (diameter), the size of the output crushed material can reach diameter 3-5mm.
Pneumatic Conveying Unit　
This unit includes one 2.2kw air blower, wind pipeline and cyclone separator. It will transport the crushed material into bin for mixing and storage. It's connected with vibrating screen and bucket conveyor with semitransparent soft pipes to cool the pellets, and collect the powder and dust.

ⅡMaterial Mixing, Storage & Conveying Section
Material Mixing, Storage Bin　
It's with 1m3 volume, its shell is made of 2.5 mm steel plate. There are two portholes on both sides for monitoring and observation. Four paddle type mixers is driven by one 0.75KW motor. The highest material level for this bin is at 800mm from the bottom.
Screw Conveyer
The input port for mixed material is at the bottom of the bin. It's 112mm in diameter, 1023 mm long. It is to feed the mixed material into the pellet mill, and is driven by frequency conversion speed controlled motor,0.37 KW, frequency conversion range is 30~60 Hz.

Ⅲ Pelletizing Section
Pellet Machine
This pellet machine makes 0.6-0.8 ton feed pellets per hour from corn , soya bean , barley. The water adding system is connected and available to adjust the moisture content of the mixed material. We can make 2.5mm 3mm 4mm5mm 6mm 8 mm pellets (diam.).
Water Tank
This tank can carry 100 L water. The water pump is at 24V, capacity : 5L/min, water discharge pressure: 8.5kg, flow meter capacity: 0.2-2GPM

Ⅳ Sieving & Pellet Conveying Section
Vibrating Sieve
3.5*3.5mm Mesh, with 0.37KW power. The size of the mesh can be changed according to your requirements. One φ45mm soft pipes is connect to collect the powder and dust.
Scraper Conveyor
It's driven by chain, the scraper size is at 145mm. The size for single section is 2436*437*484 mm. The length and height of this conveyor can be extended by adding and connecting one extra section. There are five positioning joints at the end of the conveyor, you can adjust the height and angle of the conveyor easily. Two φ100mm soft pipes is connect to cool the pellets.

ⅤAuxiliary Equipments
Steel Structure
With Anti-skidding steel floor

MCC control centre
The electronic components in this system are made by Schneider Electric with international standard. The manual operation control system is adopted. You can easy control this plant according to your demands. Two frequency converters are used to control the speed of the Screw Conveyer and Scraper Conveyor. The control cabinet is with dust prevention. The emergency stop and smart power lock is adopted