Feed Equipment Knowleagde

  • Maintenance technology of mesh belt dryers: Check some transmission mechanisms such as V-belts, chains, etc., whether the deformation is slack and wear, and adjust the tightness of the chain in time; daily maintenance and annual maintenance should leave a record. Only when the mesh belt dryer fails, can it be quickly and conveniently repaired. Every piece of mechanical maintenance is very important, because the maintenance of the machine will extend the life of the machine and maintain good work efficiency.

    mesh belt dryer

    Daily maintenance:
    1. Check the valve piping for leaks before each shift;
    2. Each rotating friction part should be regularly lubricated;
    3. Check whether the grounding wire of each fan and electric control box is reliable;
    4. Check whether the indications of each instrument are normal, and check it regularly by the measurement department;
    5. Check the body for vibration, cracks, damage and corrosion;
    6. Test whether each motor works normally and maintain it regularly;
    7. Check whether the parts and fastening parts are loose, whether there is abnormal sound, and find out the faults in time;
    8. Check some transmission mechanisms such as V-belts and chains, whether the deformation is slack and wear, and adjust the chain tightness in time;
    9. Check whether the electrical start and stop device is sensitive, accurate and reliable.
    10. Once the various parts are damaged, they should be repaired and replaced in time.

    Annual maintenance:
    1. Check that all electrical devices meet safety requirements;
    2. Completely remove defects and restore the original performance and effects of the equipment;
    3. Replace and repair worn parts and parts that lose performance;
    4. The equipment is fully overhauled.
    Whenever daily maintenance and annual maintenance should be recorded, only when the mesh belt dryer fails, can be quickly and easily repaired.

    Leave a message