Farming Knowleagde

  • test of crusher

    When the feed mill is performing performance test, the feed amount of the raw material is too large or too small, or the raw material feed amount is not controlled uniformly. It will cause distortion of the test data of performance indicators such as “consumption of electricity consumption” and “productivity”, which cannot truly reflect the performance quality of the feed mill. therefore. The feed mill should be connected to an electrical parameter tester before performing performance tests. The purpose of accessing the instrument is to test time, load power, power consumption and other important parameters, and secondly to monitor the instantaneous load power of the machine.

    The feeding operator should observe the value displayed on the load power level of the electrical parameter tester while controlling the feed flow rate. In order to ensure that the feeding is uniform and the load is relatively stable, the obtained test data can truly reflect the performance of the machine.

    Leave a message