-
17
JulWith the development of the times, more farmers who breed cattle and sheep have begun to participate in the self-mixing business, and the utilization rate of the beef and sheep feed pellet production line is also increasing year by year. Why do cattle and sheep farmers choose the production line of cattle and sheep feed pellets? It has advantages, how to maintain it after use?
Advantages of cattle feed pellet production line:
1. The ring mold feed pellet machine selected in the production line of cattle and sheep feed pellets has a unique design that reduces the resistance of the pellets, reduces the kinetic energy loss, and prolongs the service life of the mold.
2. The whole cattle feed pellet machine production line runs smoothly, and the forced feeder also promotes the granulation of the forage, which can quickly achieve the granulation effect.
3. Feed pellet production line to adapt to different material processing, such as wood chips, corn stover and other compression molding requires a lot of pressure, but still can guarantee the pressing effect and the entire production line uses high-quality alloy steel, extending the service life.
4. Cattle feed pellet production line with 2-20mm multi-aperture mold, to adapt to different materials granulation, to achieve the best results.Application and maintenance of cattle feed pellet production line:
1. Before using the whole production line, first check whether the screws of each part are tightened. At the same time, pay attention to the operation of the cattle and sheep feed pellet machine production line for 500 hours.
2. Start the motor before starting the production line of the cattle and sheep feed pellet machine, and observe whether the rotation is the same as the marking.
3, before using the cattle and sheep feed pellet machine production line to test the machine work, take 20 kg of bran or sawdust, 25 kg of fine sand, 15 kg of cooking oil or oil to mix evenly, then start, followed by successive discharge grinding, This is repeated grinding several times to achieve smooth discharge of the die hole. After the shutdown, the residual material in the die hole can be opened with oil.
4. The ratio of grass powder used in the production of 120, 150, 200, 250 and 300 in the cattle and sheep feed pellet machine production line series shall not exceed 50%.
5. The length of the pellets in the production line of cattle and sheep feed pellets can be adjusted to adjust the upper and lower positions of the cutter above the discharge port.In addition to the above advantages, the above-mentioned beef and mutton feed pellet machine has the advantages of large output and better stability. Users should choose the suitable pellet production line according to actual conditions.