Livestock Feed Machine Knowleagde

Advantage:
Traditional double belt ring die feed pellet machine has the following advantages: First, the whole machine is grease lubricated. No oil leakage: Second, because the double motor bears the weight of the ring mold and the empty shaft through the belt. The bearing in the hollow shaft is subjected to a small radial force. Extend the service life of the bearing: Third, the belt drive noise is low: Fourth, the large pulley can play the role of the flywheel, and the whole machine runs smoothly.

Disadvantages:
Traditional double belt ring die feed pellet machine has the disadvantages of affecting production efficiency and possibly increasing maintenance costs. In the granulation process. The pressure roller is subject to tremendous pressure. One end of the pressure roller shaft is fixed to the main shaft. There is no rigid support at the other end. Two sets of pressure roller assemblies. Connected together only by the pressure roller connection plates. The pressure roller is in a cantilever state. The pressure roller is subjected to a dynamic load. Thus, the matching gap between the pressing roller shaft and the hole in the main shaft gradually increases with time. The gap between the surface of the pressure roller and the contact surface of the ring mold is inconsistent. On the one hand, it will affect production efficiency. On the other hand, the two support rods supporting the connecting plate are broken off from the main shaft. Cause downtime maintenance and increase maintenance costs.