Fish Feed Machine Knowleagde

1. Clean the pond The winter weather may have thrown many dead leaves, broken branches and other debris into the pond. If all these fragments are left in the water, they will rot into a food source for algae, which can contaminate the pond.
When cleaning the pond, make sure to include the following steps:
Remove leaves and other debris (using a weed razor may help)
Vacuum the bottom
Clear dying plants
If there are flower pots in the pond, please scrub them quickly If you find any cyanobacteria in the pond, you must immediately remove them carefully and take precautions to avoid the growth of cyanobacteria in the future.
When should I start pond maintenance?
Once the ice melts, your pond is ready to be cleaned. If you live in a warm place and the pond does not freeze in winter, you should clean the pond when the fish becomes active.

2. Check the pond pump
When cleaning, you need to check the pond pump. The pond pump must be in good condition at all times, so make sure that there is no blockage in it to avoid blockage. If you have a waterfall function, make sure that there are no jams in the impeller. Remember, if the water temperature is below 50? F, the pond pump should not be turned on. Therefore, if the pond temperature is lower than the winter temperature, it needs to be closed. If the pond temperature is not lower than 50 in winter? F, you may need to run the pump throughout the season. If you have used the pump in winter, it is especially important to check the pump

3. Check your water
If your water quality is not satisfactory, you may need to partially replace the water. This means draining 50% to 70% of the water and replacing it with clean water.
Don't worry about your fish or plants. You can change the water while draining. This will require the use of the correct bacteria, which we will discuss next.
When checking the water, please pay attention to the following:
Temperature
Do you want the pond water to be about 65? The temperature in Fahrenheit, but it can be a few degrees lower or a few degrees higher. If you live in an area with hot summers, waterfalls will cool the pond.
PH
It really depends on the type of fish in your pond, but you may want your pH to be as close as possible to 7.3-7.7.
It is important to track this level. If you do not add or reduce ammonia when you need it in the pond, the fish may get sick or even die.
Kilohertz level
kH or carbonate hardness will help your filter to work normally. The higher the kH value, the better. Things like air stones will reduce carbon dioxide and improve your water resistance.

4. Add useful bacteria
Some bacteria are necessary for the healthy growth of your fish pond. This will create a natural biological filter in your fish pond. But when the water temperature is higher than 50? Before F, you should not add any such bacteria
If you use hose water in the pond
If you do need to change the water and use a hose to fill the pond with water, you will also need to use a water conditioner to prepare the water. This will remove substances such as chlorine and ammonia from the water and detoxify heavy metals
It is also completely safe for your fish and plants.

5. Check the health of the fish At the beginning of spring, make sure your fish is healthy. If they do look unhealthy at first, don't worry too much. Once you start feeding them, they will start to cheer up and look better. However, please make sure that you do not feed them too early this season. Don't overfeed them either.
Any food that the fish does not eat will add nutrients to the pond. This sounds good, but it will encourage the growth of algae, which you don't want. If your fish still appears dull and unhealthy later in the season, check for ulcers, cloudy eyes and white spots on the skin. You can contact a professional and eat antibiotic food for your fish.

6. Enjoy your water view
After finishing all the cleaning work, please carry out the remaining pond maintenance work. You can decorate the edge with stones, add plants around it or install a fountain function. You can even add floating plants to the surface of the water. But before adding any tropical, make sure the water temperature is 69F.
Do anything that makes you proud to show off the pond to your friends and family. Then, sit back and enjoy your beautiful fish pond