The feed packaging machine, like other feed machines, needs timely maintenance to ensure the quality of the processing while prolonging its service life. Simply put, the feed packaging machine is required to work in a dry and clean environment to avoid the packaging machine being sour. Work in air-like and corrosive gas environment; after use or stop using, the remaining materials in the rotating drum and the washing bucket should be cleaned in time, and then installed well, ready for the next day's work production; When the drum moves forward and backward during operation, adjust the M10 screw of the front bearing to the proper position. If the gear shaft is swaying, please adjust the M10 screw on the back of the bearing frame to the appropriate position, adjust the clearance so that the bearing does not make a sound, and turn the pulley. It is appropriate to loosen tightly. Too tight or too loose can make the machine itself different degrees. damage.In addition, the feed packaging machine also needs to inspect the machine regularly, check the worm gear, the worm, the bolts on the lubrication block, the bearing and other moving parts once a month for flexibility and wear, and find that the defects should be repaired in time, and should not be used barely; feed packaging machine If you choose not to use it for a long time, you need to clean the packaging machine and apply anti-rust oil to the smooth surface of the equipment, then cover it with a cloth.